Holden Commodore (1997-2000) VT Brake Kit – Clutch Direct

Holden Commodore (1997-2000) VT Brake Kit

Holden Commodore (1997-2000) VT Brake Kit

Holden Commodore (1997-2000) VT Brake Kit

RDASKU: RDA40 RDA41 RDB1331 RDB1332

ENGINE:

SERIES: VT

$370.00
$370.00
Sold out
Tax included.

Holden Commodore (1997-2000) VT V6 & V8 Brake Kits

RDA40 RDA41 RDB1331 RDB1332

Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

BRAKE KIT SPECIFICATIONS:

Front Rotor Type: Standard OE Replacement 

RDA rotors are a heat tempered, direct replacement rotor for easy DYI fitting.

  • ECE 11 R90 Approved
  • Black Passivation Finish
  • Heat Tempered

    These are a proven design producing doing great power, and providing easy fit on the Holden Commodore.

    BRAKE PAD SPECIFICATIONS:

        RDA’s GP Max (general purpose) brake pads are a full-bodied semi – metallic compound pad.
      • Ideal for City, Suburban & Country commuting
      • Light to moderate and frequent braking
      • Good pedal feel and stopping power
      • Works from cold to 400 degrees Celsius
      • Shimmed, chamfered and centre grooved to reduce brake vibration
      • 12 Month / 20,000 km no fault warranty

    Notes:

     

    Diameter Front: 296
    Original Height Front: 83
    Original Thickness Front: 28
    Replacement Thickness Front: 25
    Centre Hole: 71.5
    Number of Bolt Holes Front: 5


    Diameter Rear: 286
    Original Height Rear: 78.6
    Original Thickness Rear: 16
    Replacement Thickness Rear: 13.9
    Centre Hole: 70
    Number of Bolt Holes Rear: 5

    Applications:

    Holden Commodore (1997-2000) VT V6 & V8

              RDA40 RDB1331

              Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

              BRAKE KIT SPECIFICATIONS:

              Front Rotor Type: Standard OE Replacement 

              RDA rotors are a heat tempered, direct replacement rotor for easy DYI fitting.

                    • ECE 11 R90 Approved
                    • Black Passivation Finish
                    • Heat Tempered

                These are a proven design producing doing great power, and providing easy fit on the Holden Commodore.

                BRAKE PAD SPECIFICATIONS:

                          RDA’s GP Max (general purpose) brake pads are a full-bodied semi – metallic compound pad.
                        • Ideal for City, Suburban & Country commuting
                        • Light to moderate and frequent braking
                        • Good pedal feel and stopping power
                        • Works from cold to 400 degrees Celsius
                        • Shimmed, chamfered and centre grooved to reduce brake vibration
                        • 12 Month / 20,000 km no fault warranty

                Notes:

                 
                Diameter Front: 296
                Original Height Front: 83
                Original Thickness Front: 28
                Replacement Thickness Front: 25
                Centre Hole: 71.5
                Number of Bolt Holes Front: 5

                Applications:

                Holden Commodore (1997-2000) VT V6 & V8
                    RDA40 RDA41 RDX1331 RDX1332

                    Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                    BRAKE KIT SPECIFICATIONS:

                    Front Rotor Type: Standard OE Replacement 

                    RDA rotors are a heat tempered, direct replacement rotor for easy DYI fitting.

                    • ECE 11 R90 Approved
                    • Black Passivation Finish
                    • Heat Tempered

                      These are a proven design producing doing great power, and providing easy fit on the Holden Commodore.

                      BRAKE PAD SPECIFICATIONS:

                          RDA’s Extreme heavy duty brake pads are ideal for vehicles that need extra stopping power.
                        • Ideal for 4WD’s, couriers, heavy loads and towing & modified vehicles
                        • Semi metallic, low dust and extremely quiet
                        • Shimmed, chamfered and centre grooved to reduce brake vibration
                        • 18 month / 30,000 km no fault warranty

                      Notes:

                      Diameter Front: 296
                      Original Height Front: 83
                      Original Thickness Front: 28
                      Replacement Thickness Front: 25
                      Centre Hole: 71.5
                      Number of Bolt Holes Front: 5

                      Diameter Rear: 286
                      Original Height Rear: 78.6
                      Original Thickness Rear: 16
                      Replacement Thickness Rear: 13.9
                      Centre Hole: 70
                      Number of Bolt Holes Rear: 5

                      Applications:

                      Holden Commodore (1997-2000) VT V6 & V8

                            RDA40 RDX1331

                            Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                            BRAKE KIT SPECIFICATIONS:

                            Front Rotor Type: Standard OE Replacement 

                            RDA rotors are a heat tempered, direct replacement rotor for easy DYI fitting.

                            • ECE 11 R90 Approved
                            • Black Passivation Finish
                            • Heat Tempered

                              These are a proven design producing doing great power, and providing easy fit on the Holden Commodore.

                              BRAKE PAD SPECIFICATIONS:

                                  RDA’s Extreme heavy duty brake pads are ideal for vehicles that need extra stopping power.
                                • Ideal for 4WD’s, couriers, heavy loads and towing & modified vehicles
                                • Semi metallic, low dust and extremely quiet
                                • Shimmed, chamfered and centre grooved to reduce brake vibration
                                • 18 month / 30,000 km no fault warranty

                              Notes:

                               

                              Diameter Front: 296
                              Original Height Front: 83
                              Original Thickness Front: 28
                              Replacement Thickness Front: 25
                              Centre Hole: 71.5
                              Number of Bolt Holes Front: 5

                              Applications:

                              Holden Commodore (1997-2000) VT V6 & V8

                                    RDA40D RDA41D RDX1331 RDX1332

                                    Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                                    BRAKE KIT SPECIFICATIONS:

                                    Front Rotor Type: DIMPLED & SLOTTED - VENTED TYPE
                                    Improve the braking performance by upgrading to RDA Slotted and Dimpled rotors. RDA Brakes Slotted and Dimpled Rotors are a cost-effective solution to achieving increased dissipation of dust, water, and grime giving you the optimum braking performance.

                                    • ECE 11 R90 Approved
                                    • Black Passivation Finish
                                    • Heat Tempered
                                    • Pair perfectly with Extreme Heavy Duty Pads

                                    These are a proven design producing doing great power, and providing easy fit on the Holden Commodores.

                                    BRAKE PAD SPECIFICATIONS:

                                        RDA’s Extreme heavy duty brake pads are ideal for vehicles that need extra stopping power.
                                      • Ideal for 4WD’s, couriers, heavy loads and towing & modified vehicles
                                      • Semi metallic, low dust and extremely quiet
                                      • Shimmed, chamfered and centre grooved to reduce brake vibration
                                      • 18 month / 30,000 km no fault warranty

                                     Notes:

                                     

                                    Diameter Front: 296
                                    Original Height Front: 83
                                    Original Thickness Front: 28
                                    Replacement Thickness Front: 25
                                    Centre Hole: 71.5
                                    Number of Bolt Holes Front: 5


                                    Diameter Rear: 286
                                    Original Height Rear: 78.6
                                    Original Thickness Rear: 16
                                    Replacement Thickness Rear: 13.9
                                    Centre Hole: 70
                                    Number of Bolt Holes Rear: 5

                                     

                                    Applications:

                                    Holden Commodore (1997-2000) VT V6 & V8

                                          RDA40D RDX1331

                                          Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                                          BRAKE KIT SPECIFICATIONS:

                                          Front Rotor Type: DIMPLED & SLOTTED - VENTED TYPE
                                          Improve the braking performance by upgrading to RDA Slotted and Dimpled rotors. RDA Brakes Slotted and Dimpled Rotors are a cost-effective solution to achieving increased dissipation of dust, water, and grime giving you the optimum braking performance.

                                          • ECE 11 R90 Approved
                                          • Black Passivation Finish
                                          • Heat Tempered
                                          • Pair perfectly with Extreme Heavy Duty Pads

                                          These are a proven design producing doing great power, and providing easy fit on the Holden Commodores. 

                                          BRAKE PAD SPECIFICATIONS:

                                              RDA’s Extreme heavy duty brake pads are ideal for vehicles that need extra stopping power.
                                            • Ideal for 4WD’s, couriers, heavy loads and towing & modified vehicles
                                            • Semi metallic, low dust and extremely quiet
                                            • Shimmed, chamfered and centre grooved to reduce brake vibration
                                            • 18 month / 30,000 km no fault warranty

                                           Notes:

                                           

                                          Diameter Front: 296
                                          Original Height Front: 83
                                          Original Thickness Front: 28
                                          Replacement Thickness Front: 25
                                          Centre Hole: 71.5
                                          Number of Bolt Holes Front: 5

                                           

                                          Applications:

                                          Holden Commodore (1997-2000) VT V6 & V8
                                            RDA40D RDA41D DP31505 DP31506

                                            Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                                            BRAKE KIT SPECIFICATIONS:

                                            Front Rotor Type: DIMPLED & SLOTTED - VENTED TYPE
                                            Improve the braking performance by upgrading to RDA Slotted and Dimpled rotors. RDA Brakes Slotted and Dimpled Rotors are a cost-effective solution to achieving increased dissipation of dust, water, and grime giving you the optimum braking performance.

                                            • ECE 11 R90 Approved
                                            • Black Passivation Finish
                                            • Heat Tempered
                                            • Pair perfectly with Yellowstuff Pads

                                            These are a proven design producing doing great power, and providing easy fit on the Holden Commodores.

                                            BRAKE PAD SPECIFICATIONS:

                                            The EBC Yellowstuff brake pads are a high-performance pad that is suited for street and track, proven to improve the brake effect of your car by 15%  

                                                  • Zero Brake fade
                                                  • Minimal Disc damage
                                                  • Suitable for Street cars & short track events
                                                  • Medium hardness material for optimum pedal feel

                                             Notes:

                                             

                                            Diameter Front: 296
                                            Original Height Front: 83
                                            Original Thickness Front: 28
                                            Replacement Thickness Front: 25
                                            Centre Hole: 71.5
                                            Number of Bolt Holes Front: 5


                                            Diameter Rear: 286
                                            Original Height Rear: 78.6
                                            Original Thickness Rear: 16
                                            Replacement Thickness Rear: 13.9
                                            Centre Hole: 70
                                            Number of Bolt Holes Rear: 5

                                             

                                            Applications:

                                            Holden Commodore (1997-2000) VT V6 & V8

                                                RDA40D DP31505

                                                Are you wanting to replace your brake components on your Holden Commodore? RDA brake rotors improve the stopping power of your vehicle, and provide OEM levels of quality and durability. These are a proven product, produced by a trusted brand, providing a fantastic upgrade to your braking performance, on road, or off the beaten track.

                                                BRAKE KIT SPECIFICATIONS:

                                                Front Rotor Type: DIMPLED & SLOTTED - VENTED TYPE
                                                Improve the braking performance by upgrading to RDA Slotted and Dimpled rotors. RDA Brakes Slotted and Dimpled Rotors are a cost-effective solution to achieving increased dissipation of dust, water, and grime giving you the optimum braking performance.

                                                • ECE 11 R90 Approved
                                                • Black Passivation Finish
                                                • Heat Tempered
                                                • Pair perfectly with Yellowstuff Pads

                                                These are a proven design producing doing great power, and providing easy fit on the Holden Commodores.

                                                BRAKE PAD SPECIFICATIONS:

                                                The EBC Yellowstuff brake pads are a high-performance pad that is suited for street and track, proven to improve the brake effect of your car by 15%  

                                                      • Zero Brake fade
                                                      • Minimal Disc damage
                                                      • Suitable for Street cars & short track events
                                                      • Medium hardness material for optimum pedal feel


                                                 Notes:

                                                 

                                                Diameter Front: 296
                                                Original Height Front: 83
                                                Original Thickness Front: 28
                                                Replacement Thickness Front: 25
                                                Centre Hole: 71.5
                                                Number of Bolt Holes Front: 5

                                                 

                                                Applications:

                                                Holden Commodore (1997-2000) VT V6 & V8

                                                  Back to Holden Commodore Clutches

                                                  Leaders in high performance, off-road and heavy duty clutches for thousands of vehicles. Get in touch with us today.

                                                  (08) 6317 9119